Electro Voice Microphone N D367s User Manual

N/D367s  
N/DYM® Dynamic Cardioid  
Vocal Microphone  
Key Features:  
Classic N/DYM® sound  
Smooth, controlled frequency response  
High N/DYM® sensitivity  
Superior multistage shock mount and “Warm  
Grip” handle for unmatched low handling  
noise  
On/Off switch  
Also sounds great when used on a podium  
General Description:  
The Electro-Voice N/D367s is a member of a family of microphones  
that are manufactured with refinements that enhance the sonic  
smoothness, improve gain-before-feedback and provide more  
consistent performance with greater durability than earlier  
generations of N/DYM® microphones.  
Technical Specifications:  
The controlled response of the N/D367s allows the user to easily  
work the microphone for optimal performance.  
Element: Dynamic N/DYM magnet structure  
The N/DYM® magnet geometry used in the N/D367s, combined  
with a reinforced diaphragm design, creates a smooth, extended  
frequency response with a warm, open and transparent sound  
quality.  
The N/DYM® microphones feature EV’s AcoustiDYMTM shock -  
mount system. This unique vibration isolating system works as a  
multistage device. At low frequencies, a rear sound wave cancels  
the diaphragm motion, while, at high frequencies, the specially  
designed rubber shock mount isolates the transducer from motion.  
CombiningAcoustiDYMTM with the elastomeric Warm-GripTMhandle  
and the windscreen bumper produces an advanced technology,  
vibration isolating system which dramatically reduces all forms of  
handling noise for the most demanding situations.  
Freq. Response, Close: 30 Hz - 22,000 Hz  
Freq. Response, Far: 60 Hz - 22,000 Hz  
Polar Pattern: Cardioid  
Sensitivity, Open Circuit 3.0 mV/pascal  
Voltage @ 1 kHz:  
Dynamic Range: 144 dB  
Equivalent Output Noise: 14 dB A weighted  
(0 dB = 0.00002 pascal)  
Polarity: Positive pressure on diaphragm causes  
positive voltage on pin 2 ref. pin 3  
Impedance: 350 ohms balanced (low-z)  
Microphone Connector: 3 pin XLR type  
Finish: Non-reflecting black  
The N/D367s has a cardioid polar pattern, providing an enhanced  
front-area sensitivity and acoustic rejection directly behind the  
microphone, reducing feedback under live performance conditions.  
This is particularly useful with typical monitor speaker placement  
and high sound pressure (SPL) requirements. Additionally, the N/  
D367s’s polar patterns are unusually uniform with frequency,  
ensuring superior gain-before-feedback in live applications and  
superior isolation when used in the studio.  
Accessories Included: Mic Stand Adapter  
Soft Zippered "Gig" Bag  
Dimensions, Length: 7.12" (181 mm)  
Diameter: 2.05" (52 mm)  
Shank: 0.80" (20 mm)  
Net Weight: 9.1 oz (258 g)  
Shipping Weight: 18.9 oz (535 g)  
The N/D367s pop filter’s unique design utilizes a specially  
processed AcoustifoamTM filter to minimize wind noise and vocal  
P-pops. This design makes the pop filter an integral part of the  
microphone’s removable front grille assembly, allowing easy  
cleaning for continued top performance.  
The N/D367s also features a noiseless on/off switch, which is  
useful in giving the speaker/vocalist control of their signal to the  
mixer.  
 

Coleman Camping Equipment 4344 User Manual
Craftsman Lawn Mower 29137614 User Manual
Cuisinart Cookware CRC 400 User Manual
Cuisinart Toaster CGR SMC User Manual
Curtis Camcorder VR285 User Manual
Curtis Stereo System RCD621 User Manual
Dacor Oven MOH User Manual
Elation Professional Work Light 1400E User Manual
Extron electronic Stereo Amplifier TLP 350MV User Manual
FUNAI VCR MFV260C User Manual